Jub's Blog

Flying My Racer: Part 2

This is my second flight with my racer, I got a lot more time in the air and gave in-field charging a go. It worked pretty well, and I didn’t have any major crashes.

Racer Maiden Flight

OctoPrint

OctoPrint is a wonderful addition to any 3D printer setup. It provides a really snappy, responsive interface and is extendable through plugins. You can run it on a RaspberryPi, or any PC you’ve got lying around.

CI/CD On Jubaleth.WTF

There are a number of ways that one can deploy a website; a completely automated deployment was my goal, and this is how I achieved it. I have two separate hosting solutions for this project, one for staging, and one for …

New Gantry

I’ve decided that I need a new XY gantry. The old one is fine, if you don’t want to change nozzles. As this is a very basic requirement of this project, I’ve had to come up with a solution to a mechanical problem I have …

First Post

This is my first blog post, and I thought why not, a fitting subject would be using Hugo to run my static site. And when I say first post, I really mean first. I’ve never written posts before, so this is relatively new …